Shipping Tips & Information
for Your Powder Coated Parts

IMPORTANT INFORMATION TO READ PRIOR TO SHIPPING YOUR PARTS:

1. Before shipping, all parts must be clean and dry.  Oily parts can be degreased with brake cleaner or another type of degreaser…the main goal is make sure the oil is removed.
   
   
2. Prior to shipping, please remove all bearings, bushings, labels, plastic, rubber, seals, and weights from your parts.  Nonmetallic parts cannot tolerate the heat that is generated during the powder coating process.
   
   
3. Most parts require some prep work prior to coating. Prep work includes cleaning, sandblasting, surface sanding and masking. If you have specific masking requirements, please include a detailed explanation with the shipment.  Charges for prep work will vary depending on the difficulty of the job. If any additional charges are incurred, you will be advised.
   
   
4. The customer is responsible for all shipping charges to and from ArmorTech.  We will take extreme care in wrapping and packing your finished parts so they arrive in excellent condition, however, ArmorTech cannot be responsible for damages caused by the shipping company.
   
   
5. ArmorTech is not responsible for the structural integrity of items due to their age and condition prior to preparation. ArmorTech is also not responsible for holes (due to rust) after the sandblasting process, or breakage of the part during the disassembly or assembly process.